Introduction To Product Features Of Hot Press Molding Machine

Product features of hot press forming machine:

1. With liquid pressure as the power source, compressed air is not used as traditional equipment Because the compressibility of hydraulic pressure is almost zero, its stability in speed and pressure is much higher than that of ordinary IMD molding machine

2. The integral welded C-type open structure is adopted, so the welds are stress relieved and processed on the processing equipment Very easy to operate,

3. The output of the machine is optional at 5-20tf (ton force),

4. The maximum speed of the machine can reach 250mm / s, and the impact noise does not exceed 80dB, which is equivalent to normal conversation in the office

5. The machine adopts carbon fiber heating tube with electrothermal conversion efficiency of more than 98%, rapid temperature rise, small thermal lag and uniform heating (the far infrared emitted is called the lifeline of human beings by the medical community). Its service life (continuous point burning) is more than 6000 hours. Long term operation of the machine by staff can strengthen human blood circulation, accelerate new metabolism and enhance immune ability

6. The machine controls the voltage of the heating body (reduce its power supply voltage when it is close to the set temperature to ensure that the heating tube is in a long-term lighting state and prolong its service life). The displayed temperature and the actual temperature are controlled within plus or minus 1 ℃